New Bobcat Loader Attachments

Root grapple attachment

Improved Tilt-Tatch

The Tilt-Tatch™ attachment has been re-designed to fit a wider range of Bobcat compact equipment. By allowing the attachment to oscillate plus or minus 15 degrees, it’s great for cutting a level path on a hillside, digging a drainage ditch with the corner of a bucket or keeping a load level on uneven terrain. Improvements include sturdier construction, replaceable wear components and debris guards on the front of the Bob-Tach™ mounting system. It is approved for Bobcat S130-S250 skid-steer loaders, T180-T190 compact track loaders and the Toolcat™ 5600 utility work machine.

M06 backhoe

Mounted on the Bobcat® mini track loader, the new M06 backhoe attachment offers an easier, faster alternative to shovels for all kinds of digging jobs in backyards and tight-access areas. Available in 9- and 12-in. bucket widths, it will dig over 6-ft.-deep. Pin-on stabilizer pads remove easily to fit through gates no wider than 36 in. When installed, the stabilizers measure 42-in.-wide.

This backhoe is ideal for jobs such as digging utility trenches or creating ponds. You can also team it with the Bobcat vibratory plow when installing irrigation systems.

Boring unit

The new Bobcat boring unit eliminates the time and expense of tearing out sidewalks, driveways and other paved areas to install irrigation lines and power and communication cables. Depending on soil composition, the hydraulically powered unit bores horizontally as deep as 2 ft. and up to a distance of 30 ft. to accommodate pipe or cables as thick as 4-in. in diameter. After drilling the bore, the unit can be used to pull the pipe or cable back through the hole. Tools include various sizes of boring bits, reamers and heavy-duty rock heads with carbide bits. The boring unit is approved for the Bobcat MT50, MT52 and MT55 mini track loaders and the Bobcat 463 skidsteer loader.

2200 with sprayer attachment

Dozer blades

Two new models expand the choices of dozer blades for Bobcat loaders. The new 68-in.-wide blade is designed for the Bobcat S130 skidsteer loader and T140 compact track loader. The 96-in. model is approved for the Bobcat S220-S300 skid-steer loaders, the T250 and T300 compact track loaders and the A300 all-wheel steer loader. Like the 80- and 90-in.-wide blades, the newest models feature electric-over-hydraulic controls and a reversible cutting edge.

Root grapple

Make quick, easy work of picking up roots, brush, rocks and other debris when clearing sites on construction and landscaping projects, or when natural disasters hit. Available in 72- or 82-in. widths, the skeletal design allows dirt to fall between the teeth. For ease of operation, the curved bottom teeth allow the grapple to scoop up material without diving into the ground. These versatile grapples are approved for Bobcat S175-S300 skid-steer loaders, T180-T300 compact track loaders and the A300 allwheel steer loader.

Sprayer

Put your Bobcat utility work machine or utility vehicle to work controlling weeds, spraying insecticides or applying liquid fertilizer or ice-melt with the new Bobcat 50-gal. sprayer. It’s great for grounds maintenance jobs around farms and homes with acreage as well as commercial sites, resorts and recreational areas. The four-nozzle boom unfolds to a 10-ft. width to quickly cover large areas. Use the hand wand for spot spraying. The boom height adjusts to match the height of the vegetation.