324 Compact (Mini) Excavator
Year(s) of Production:
2010

324 Compact (Mini) Excavator

Year(s) of Production:
2010

Non-Current Model: See the current E20 Compact Excavator

324 Specifications

Units

324 Key Specifications

Operating Weight
3,571 lb
Bucket Digging Force
3,620 lbf
Maximum Reach at Ground Level
168 in
Width
38.6 in
Tail Swing Type
Conventional 

324 Key Specifications

Operating Weight
3,571 lb
Bucket Digging Force
3,620 lbf
Maximum Reach at Ground Level
168 in
Width
38.6 in
Tail Swing Type
Conventional 

Engine

Emissions Tier (EPA)
Tier 4 
Engine Fuel
Diesel 
Maximum Governed RPM
2,500 rpm
Turbocharged Engine
no 
Optional Turbocharged Engine
N/A 

Performance

Operating Weight
3,571 lb
Weight Class
1.5 t
Travel Speed - High
2.5 mph
Travel Speed - Low
1.5 mph
Arm Digging Force
1,778 lbf
Bucket Digging Force
3,620 lbf
Rated Lift Capacity
1032 lb
Lift Radius
118 in
Boom Swing - Left
80° 
Boom Swing - Right
60° 
Maximum Dig Depth
102 in
Max Dump Height
104.4 in
Maximum Reach at Ground Level
168 in

Capacities

Fuel Tank
6.3 gal

Hydraulic System

Auxiliary Std Flow
7.9 gal/min
Auxiliary Pressure
3,350 psi

Dimension

Length
153.7 in
Overall Length in Travel Position
153.7 in
Width
38.6 in
Height
85.5 in
Height with Operator Cab
85.5 in

Features

Air Conditioning
Not Applicable  
Cab Enclosure
Optional 
Cab Heater
Optional 
Heater Air Conditioning
Not Applicable  
Radio
Not Applicable  
Tail Swing Type
Conventional 
Engine Shutdown
Not Applicable  
Auxiliary Hydraulics
Standard 
Secondary Auxiliary Hydraulics
Not Applicable  
Quick Tach System
Not Applicable  
Rubber Track
Standard 
Angle Blade
Not Applicable  

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.