E26 Compact (Mini) Excavator
Year(s) of Production:
2011 - 2019

E26 Compact (Mini) Excavator

Year(s) of Production:
2011 - 2019

Non-Current Model: See the current E26 Compact Excavator

E26 Specifications

Units

E26 Key Specifications

Operating Weight
5,666 lb
Bucket Digging Force
4,991 lbf
Maximum Reach at Ground Level
178.8 in
Width
59.6 in
Tail Swing Type
Minimal 

E26 Key Specifications

Operating Weight
5,666 lb
Bucket Digging Force
4,991 lbf
Maximum Reach at Ground Level
178.8 in
Width
59.6 in
Tail Swing Type
Minimal 

Engine

Emissions Tier (EPA)
Interim Tier 4 
Engine Fuel
Diesel 
Maximum Governed RPM
2,500 rpm
Turbocharged Engine
no 
Optional Turbocharged Engine
N/A 

Performance

Operating Weight
5,666 lb
Weight Class
2.6 t
Travel Speed - High
2.8 mph
Travel Speed - Low
1.5 mph
Arm Digging Force
3,552 lbf
Bucket Digging Force
4,991 lbf
Rated Lift Capacity
1997 lb
Lift Radius
118 in
Boom Swing - Left
60° 
Boom Swing - Right
60° 
Maximum Dig Depth
102 in
Max Dump Height
118.8 in
Maximum Reach at Ground Level
178.8 in

Capacities

Fuel Tank
9.1 gal

Hydraulic System

Auxiliary Std Flow
12.5 gal/min
Auxiliary Pressure
2,610 psi

Dimension

Length
170.4 in
Overall Length in Travel Position
170.4 in
Width
59.6 in
Height
94.9 in
Height with Operator Cab
94.9 in

Features

Air Conditioning
Optional 
Cab Enclosure
Optional 
Cab Heater
Optional 
Heater Air Conditioning
Optional 
Radio
Optional 
Tail Swing Type
Minimal 
Engine Shutdown
Standard 
Auxiliary Hydraulics
Standard 
Secondary Auxiliary Hydraulics
Not Applicable  
Quick Tach System
Standard 
Rubber Track
Standard 
Selectable Auxiliary Hydraulic Flow
Not Applicable  
Angle Blade
Not Applicable  

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.