E85 Compact (Mini) Excavator
Year(s) of Production:
2013

E85 Compact (Mini) Excavator

Year(s) of Production:
2013

Non-Current Model: See the current E88 Compact Excavator

E85 Specifications

Units

E85 Key Specifications

Operating Weight
18,960 lb
Bucket Digging Force
14,509 lbf
Maximum Reach at Ground Level
286.8 in
Width
91 in
Tail Swing Type
Minimal 

E85 Key Specifications

Operating Weight
18,960 lb
Bucket Digging Force
14,509 lbf
Maximum Reach at Ground Level
286.8 in
Width
91 in
Tail Swing Type
Minimal 

Engine

Emissions Tier (EPA)
Tier 4 
Engine Fuel
Diesel 
Maximum Governed RPM
2,100 rpm
Turbocharged Engine
no 
Optional Turbocharged Engine
N/A 

Performance

Operating Weight
18,960 lb
Weight Class
8.6 t
Travel Speed - High
2.9 mph
Travel Speed - Low
1.7 mph
Arm Digging Force
8,069 lbf
Bucket Digging Force
14,509 lbf
Rated Lift Capacity
9327 lb
Lift Radius
118 in
Boom Swing - Left
70° 
Boom Swing - Right
55° 
Maximum Dig Depth
186 in
Max Dump Height
198 in
Maximum Reach at Ground Level
286.8 in

Capacities

Fuel Tank
29.1 gal

Hydraulic System

Auxiliary Std Flow
25.1 gal/min
Auxiliary Pressure
3,045 psi

Dimension

Length
246 in
Overall Length in Travel Position
158.4 in
Width
91 in
Height
104 in
Height with Operator Cab
104 in

Features

Air Conditioning
Standard 
Cab Enclosure
Standard 
Cab Heater
Standard 
Heater Air Conditioning
Standard 
Radio
Optional 
Tail Swing Type
Minimal 
Engine Shutdown
Not Applicable  
Auxiliary Hydraulics
Standard 
Secondary Auxiliary Hydraulics
Optional 
Quick Tach System
Optional 
Rubber Track
Standard 
Selectable Auxiliary Hydraulic Flow
Standard 
Angle Blade
Not Applicable  

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.