1. Home
  2. Equipment
  3. Loaders
  4. Mini Track Loaders
  5. Non-Current Models
  6. MT50
Non-Current Models
MT50 Mini Track Loader
Year(s) of Production:
2001 - 2003

MT50 Mini Track Loader

Year(s) of Production:
2001 - 2003
Shop Parts, Fluids & More

MT50 Specifications

Units

MT50 Key Specifications

MT50 (2003)
Rated Operating Capacity (ISO)
500 lb
Operating Weight
2497 lb
Ground Pressure (Rubber)
5.2 psi
Width
35.6 in
Height to Bucket Hinge Pin
74.8 in

MT50 Key Specifications

MT50 (2003)
Rated Operating Capacity (ISO)
500 lb
Operating Weight
2497 lb
Ground Pressure (Rubber)
5.2 psi
Width
35.6 in
Height to Bucket Hinge Pin
74.8 in

Engine

MT50 (2003)
Engine Cooling
Liquid 
Engine Fuel
Diesel 
Displacement
44 in³
Number of Cylinders
3 
Horsepower
18.8 hp

Performance

MT50 (2003)
Rated Operating Capacity (ISO)
500 lb
Tipping Load
1500 lb
Operating Weight
2497 lb
Ground Pressure (Rubber)
5.2 psi
Travel Speed
3.2 mph
Travel Speed - Reverse
1.5 mph

Capacities

MT50 (2003)
Fuel Tank
8 gal 

Hydraulic System

MT50 (2003)
Pump Capacity
13.4 gal/min
System Relief @ Quick Couplers
2,600 psi

Dimension

MT50 (2003)
Width
35.6 in
Height
44.4 in
Height to Bucket Hinge Pin
74.8 in
Length of track on ground
34 in
Reach @ Maximum Height
19.2 in

Features

MT50 (2003)
Lift-Arm Support
Standard 
Auxiliary Hydraulics
Standard 
Spark Arrestor Muffler
Yes 
Bob-Tach Attachment System
Standard 
Reverse Travel Stop Panel
Standard 
Neutral Start Interlocks
Standard 
Lift Arm Lockout With Manual Bypass
Standard 
Tilt Lockout
Standard 
Built-In Tie Down & Crane/Lift Locations
Stanard 

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.