1. Home
  2. Equipment
  3. Loaders
  4. Mini Track Loaders
  5. Non-Current Models
  6. MT52
Non-Current Models
MT52 Mini Track Loader
Year(s) of Production:
2008

MT52 Mini Track Loader

Year(s) of Production:
2008
Shop Parts, Fluids & More

MT52 Specifications

Units

MT52 Key Specifications

MT52
Rated Operating Capacity (ISO)
520 lb
Operating Weight
2580 lb
Ground Pressure (Rubber)
4.7 psi
Width
35.6 in
Height to Bucket Hinge Pin
71.2 in

MT52 Key Specifications

MT52
Rated Operating Capacity (ISO)
520 lb
Operating Weight
2580 lb
Ground Pressure (Rubber)
4.7 psi
Width
35.6 in
Height to Bucket Hinge Pin
71.2 in

Engine

MT52
Emissions Tier (EPA)
Tier 4 
Engine Cooling
Liquid 
Engine Fuel
Diesel 
Displacement
44 in³
Number of Cylinders
3 
Horsepower
20 hp

Performance

MT52
Rated Operating Capacity (ISO)
520 lb
Tipping Load
1600 lb
Operating Weight
2580 lb
Ground Pressure (Rubber)
4.7 psi
Travel Speed
3.5 mph
Travel Speed - Reverse
1.5 mph

Capacities

MT52
Fuel Tank
7 gal 

Hydraulic System

MT52
Pump Capacity
12 gal/min
System Relief @ Quick Couplers
2,900 psi

Dimension

MT52
Length
93.1 in
Width
35.6 in
Height
49.1 in
Height to Bucket Hinge Pin
71.2 in
Length of track on ground
34 in
Reach @ Maximum Height
18.2 in

Features

MT52
Lift-Arm Support
Standard 
Auxiliary Hydraulics
Standard 
Spark Arrestor Muffler
Standard 
Bob-Tach Attachment System
Standard 
Reverse Travel Stop Panel
Standard 
Wide Track
Not Applicable  
Neutral Start Interlocks
Standard 
Lift Arm Lockout With Manual Bypass
Standard 
Tilt Lockout
Standard 
Built-In Tie Down & Crane/Lift Locations
Standard 
Ride-on Platform
Optional 

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.