MT85 Mini Track Loader
Year(s) of Production:
2015

MT85 Specifications

Units

MT85 Key Specifications

Rated Operating Capacity (ISO)
850 lb
Operating Weight
3103 lb
Ground Pressure (Rubber)
4.9 psi
Width
35.6 in
Height to Bucket Hinge Pin
80.9 in

MT85 Key Specifications

Rated Operating Capacity (ISO)
850 lb
Operating Weight
3103 lb
Ground Pressure (Rubber)
4.9 psi
Width
35.6 in
Height to Bucket Hinge Pin
80.9 in

Engine

Emissions Tier (EPA)
Tier 4 
Engine Cooling
Liquid 
Engine Fuel
Diesel 
Displacement
55 in³
Number of Cylinders
3 
Horsepower
24.8 hp

Performance

Rated Operating Capacity (ISO)
850 lb
Tipping Load
2458 lb
Operating Weight
3103 lb
Ground Pressure (Rubber)
4.9 psi
Travel Speed
4.1 mph
Travel Speed - Reverse
2.9 mph

Capacities

Fuel Tank
7 gal 

Hydraulic System

Pump Capacity
12 gal/min
System Relief @ Quick Couplers
2,900 psi

Dimension

Length
106.2 in
Width
35.6 in
Height
54.6 in
Height to Bucket Hinge Pin
80.9 in
Length of track on ground
40.6 in
Reach @ Maximum Height
18.6 in

Features

Lift-Arm Support
Standard 
Auxiliary Hydraulics
Standard 
Spark Arrestor Muffler
Standard 
Bob-Tach Attachment System
Optional 
Reverse Travel Stop Panel
Not Applicable  
Wide Track
Optional 
Neutral Start Interlocks
Standard 
Lift Arm Lockout With Manual Bypass
Standard 
Tilt Lockout
Standard 
Built-In Tie Down & Crane/Lift Locations
Standard 
Ride-on Platform
Standard 

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.