1. Home
  2. Attachments
  3. Flail Mower
Attachments
Flail Mower
Attachment

Flail Mower
Attachment

  • Attack your most difficult brush and sapling clearing projects  
  • Easily shred vegetation on virtually any terrain, including hillsides, roadways, trails, riverbanks and utility right-of-way  
  • Rotor brake stops the attachment in 7 seconds or less after hydraulics are deactivated 
  • Heavy-duty flanges protect the drive train from dust and debris 
Contact Local Dealer

Features & Benefits

Top Tasks

  • Clear brush and saplings in ditches, right-of-way, hillsides, roadways and other areas 
  • Control overgrowth on trails, culvert areas, ditches, and cattails on lake shores 
  • Prepare land and other properties on new construction sites 

How It Works

Rotating flail knives cut through material while the operator controls the cutting height by adjusting the arm of the excavator. Free-swinging knives rotate around the axis, catching the cut material in a cylindrical hood. The operator can reverse the direction of the knives by switching the hydraulic hoses at the drive motor. 

Compatible Models

Specifications

Units

General

Flail Mower - 40"
Flail Mower - 30"
Flail Mower - 40", R
Operating Weight
736 lb
649 lb
881 lb
Length
32.7 in
32.7 in
32.7 in
Width
60.4 in
50.4 in
60.4 in
Height
28.1 in
28.1 in
28.1 in
Cutting Width
40 in
30 in
40 in
Flow Range
14-22.4 GPM (53-85 lpm) 
12.2-19.5 GPM (46-74 lpm) 
18.4-31.7 GPM (70-120 lpm) 
Operating Weight with X-Change Mount
736 lb
649 lb
881 lb
Number of Knives
36 
27 
36 
Maximum Cutting Capacity
4 in 
4 in 
4 in 
Operating Weight with Pin-on Mount
708 lb
876 lb

General

Flail Mower - 30"
Flail Mower - 40"
Flail Mower - 40", R
Operating Weight
649 lb
736 lb
881 lb
Length
32.7 in
32.7 in
32.7 in
Width
50.4 in
60.4 in
60.4 in
Height
28.1 in
28.1 in
28.1 in
Cutting Width
30 in
40 in
40 in
Flow Range
12.2-19.5 GPM (46-74 lpm) 
14-22.4 GPM (53-85 lpm) 
18.4-31.7 GPM (70-120 lpm) 
Operating Weight with X-Change Mount
649 lb
736 lb
881 lb
Number of Knives
27 
36 
36 
Maximum Cutting Capacity
4 in 
4 in 
4 in 
Operating Weight with Pin-on Mount
708 lb
876 lb

Additional Details

Using powerful triple knife flails, you can mulch small branches, saplings, thick grass and other vegetation up to 4 in. in diameter.

Side safety chains help contain debris within the housing that could be thrown during operation. The rotor brake stops the attachment in 7 seconds or less after hydraulics are deactivated.

A rubber torsion disc absorbs impact loads that are encountered during operation. To protect the drive train, the flail mower features heavy-duty flanges on both sides of the rotor to protect the drive train from dust and debris. This also prevents wire from damaging the drive train mechanism.

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.